MultiTouch for Vista安裝問題(Win8也適用)

有時候安裝MultiTouch for Vista時，以系統管理員身分執行Install driver.cmd，會出現命令視窗一閃就不見了。這時，可以將MultiTouch for Vista目錄拷貝到C:\下，再以系統管理員身分執行命令式窗，如下圖：

於命令視窗下，先切換到C:\MultiTouch for Vista\Driver\x64\目錄下，如下圖：
p.s.32bit切換到C:\MultiTouch for Vista\Driver\x32\目錄下

再執行
devcon install UniSoftHid.inf "{61E08B9D-3633-416a-B153-4647FCA67D5B}\HID_DEVICE"
，如下圖：

執行完成會出現下圖：

之後，不用smoothboard定位，改用WiiTUIO.exe來進行四點定位，如下圖：

完成後，即可多點觸控！

p.s.於Win8下，也必須以系統管理人員來執行WiiTUIO.exe，才能夠保存定位資料，否則會出現如下圖：

p.s.devcon.exe是微軟所出的命令模式下安裝裝置驅動程式的工具程式，語法如下：


Device Console Help:

devcon [-r] [-m:\\<machine>] <command> [<arg>...]

-r           Reboots the system only when a restart or reboot is required.

<machine>    Specifies a remote computer.

<command>    Specifies a Devcon command (see command list below).

<arg>...     One or more arguments that modify a command.

For help with a specific command, type: devcon help <command>
classfilter          Add, delete, and reorder class filters.

classes              List all device setup classes.

disable              Disable devices.

driverfiles          List installed driver files for devices.

drivernodes          List driver nodes of devices.

enable               Enable devices.

find                 Find devices.

findall              Find devices, including those that are not currently attached.

help                 Display Devcon help.

hwids                List hardware IDs of devices.

install              Install a device manually.

listclass            List all devices in a setup class.

reboot               Reboot the local computer.

remove               Remove devices.

rescan               Scan for new hardware.

resources            List hardware resources for devices.

restart              Restart devices.

sethwid              Modify Hardware ID's of listed root-enumerated devices.

stack                List expected driver stack for devices.

status               List running status of devices.

update               Update a device manually.

updateni             Manually update a device (non interactive).

dp_add               Adds (installs) a third-party (OEM) driver package.

dp_delete            Deletes a third-party (OEM) driver package.

dp_enum              Lists the third-party (OEM) driver packages installed on this machine.